Free 300-410 Exam Braindumps - New 2023 Cisco Pratice Exam
Practice Test for 300-410 Certification Real 2023 Mock Exam
Why You Need the CCENT Certification?
The CCNA certification is not sufficient to meet the current needs of Networking Industry. With the help of CCENT certification, you will be able to get more jobs in IT industry. Success in CCENT exam is only half the work of getting a job. Engineered for CCENT preparation are available for you. Cisco 300-410 exam dumps are essential for the preparation of CCENT exam. Gaining knowledge in Networking is mandatory before taking Cisco CCENT certification exam. Best practices are followed to prepare questions for the CCENT exam. Software for CCENT certification is available for you. Desktop is required to check the validity of CCENT certification exam. Based on the CCENT certification exam, your knowledge is guided to become a certified Networking expert. Certshero offers the CCENT exam preparation to the students at lowest cost. Implementing the CCENT certification is the only way to make you more marketable. Cisco's CCENT certification exam is available for you. Cisco CCENT certification is available only after the completion of CCNA Certification.
Ccnp exam is a major certification for an IT professional. Cisco certifications are the standards that business depends on.
What's Next After Cisco ENARSI?
Once you have passed the Cisco ENARSI 300-410 exam, assuming you have already passed the core 350-401 ENCOR test, and have been awarded the prestigious CCNP Enterprise certification, you get new prospects for professional improvement. Earning this certificate automatically earns you the right to boast about it on social media platforms such as LinkedIn to attract more and more job offers with high paying salaries. CCNP Enterprise is valid for a total of 3 years, after which recertification should be done by keeping up with educational activities offered by Cisco or completing exams. Finally, one can also opt for expert-level certifications such as CCIE Enterprise Infrastructure or CCIE Enterprise Wireless. Each of them requires applicants to only pass one extra lab exam.
NEW QUESTION # 53
Which values identifies VPNs in an EVN environment?
- A. VLAN ID
- B. Virtual network tag
- C. DLCI
- D. Route target
Answer: B
Explanation:
Explanation/Reference:
https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/layer-3-vpns-l3vpn/whitepaper_c11-
638769.html
NEW QUESTION # 54
Refer to the exhibit.
Which interface configuration must be configured on the space A route enable a dynamic DMVPN tunnel with the spoke B router?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: C
NEW QUESTION # 55
Refer to the exhibit.
An engineer configured IP SLA on R1 to avoid the ISP link flapping problem. but it is not working as designed IP SLA should wait 30 seconds before switching traffic to a secondary connection and then revert to the primary link after waning 20 seconds, when the primary link is available and stabilized. Which configuration resolves the issue?
- A. R1(config)#ip sla 700
R1(config-ip-sla)#delay down 30 up 20 - B. R1(config)#track 700 ip sla 700
R1(config-track)#delay down 20 up 30 - C. R1(config)#ip sla 700
R1(config-ip-sla)#delay down 20 up 30 - D. R1(config)#track 700 ip sla 700
R1(config-track)#delay down 30 up 20
Answer: D
Explanation:
"wait 30 seconds before switching traffic to a secondary connection" -> delay down 30
"then revert to the primary link after waiting 20 seconds" -> up 20
Under the track object, you can specify delays so we have to configure delay under "track 700 ip sla
700" (not under "ip sla 700").
NEW QUESTION # 56
LAB SIMULATION
WAN
CORE
MGMT
Answer:
Explanation:
CORE
policy-mao CoPP
class CoPP-CRITICAL
police 1000000 50000 50000 conform-action transmit exceed-action transmit
CORE# Copy run start
TESTING: -
CORE
MGMT
NEW QUESTION # 57 
Refer to the exhibit. an engineer is trying to get 192.168.32.100 forwarded through 10.1.1.1, but it was forwarded through 10.1.1.2. What action forwards the packets through 10.1.1.1?
- A. Configure EIGRP to receive 192.168.32.0 route with longer prefix than /19.
- B. Configure EIGRP to receive 192.168.32.0 route with equal or longer prefix than /24.
- C. Configure EIGRP to receive 192.168.32.0 route with lower metric.
- D. Configure EIGRP to receive 192.168.32.0 route with lower admin distance.
Answer: B
NEW QUESTION # 58 
Refer to the exhibit. Why is user authentication being rejected?
- A. The TACACS+ server refuses the user because the user is set up for CHAP.
- B. The TACACS+ server is down, and the user is in the local database.
- C. The TACACS+ server expects "user", but the NT client sends "domain/user".
- D. The TACACS+ server is down, and the user is not in the local database.
Answer: D
Explanation:
Section: Infrastructure Security
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security-vpn/terminal-access-controller-access- control-system-tacacs-/13864-tacacs-pppdebug.html
NEW QUESTION # 59
Refer to the exhibit.
A user cannot SSH to the router. What action must be taken to resolve this issue?
- A. Configure transport input ssh
- B. Configure transport output ssh
- C. Configure ip ssh version 2
- D. Configure ip ssh source-interface loopback0
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/security/configuration_g
NEW QUESTION # 60
Refer to the exhibit.
Which action resolves the failed authentication attempt to the router?
- A. Configure aaa authorization login command on line console 0
- B. Configure aaa authorization console global command
- C. Configure aaa authorization console command on line vty 0 4
- D. Configure aaa authorization login command on line vty 0 4
Answer: B
Explanation:
In the debug output, we see that the Authorization (not Authentication) failed so we need to correct the authorization. In order to enable authorization, we must use the global command
"aaa authorization console" first.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/security/a1/sec-a1-cr-book/sec-cr-a1.html
NEW QUESTION # 61
Refer to the exhibit.
An engineer is monitoring reachability of the configured default routes to ISP1 and ISP2. The default route from ISP1 is preferred if available. How is this issue resolved?
- A. Start IP SLA by defining frequency and scheduling it
- B. Use the same AD for both default routes
- C. Use the icmp-echo command to track both default routes
- D. Start IP SLA by matching numbers for track and ip sla commands
Answer: D
NEW QUESTION # 62
Refer to the exhibit.
AAA server 10.1.1.1 is configured with the default authentication and accounting settings, but the switch cannot communicate with the server Which action resolves this issue?
- A. Match the accounting port
- B. Match the authentication port
- C. Correct the shared secret.
- D. Correct the timeout value.
Answer: B
Explanation:
Explanation
Command Default
Accounting port: 1813
Authentication port: 1812
Accounting: enabled
Authentication: enabled
Retransmission count: 1
Idle-time: 0
Server monitoring: disabled
Timeout: 5 seconds
Test username: test
Test password: test
NEW QUESTION # 63
Which statement about route distinguishers in an MPLS network is true?
- A. Route distinguishers allow multiple instances of a routing table to coexist within the edge router.
- B. Route distinguishers are used for label bindings.
- C. Route distinguishers make a unique VPNv4 address across the MPLS network.
- D. Route distinguishers define which prefixes are imported and exported on the edge router.
Answer: C
Explanation:
Section: VPN Technologies
Explanation/Reference:
NEW QUESTION # 64
Refer to the exhibit.
A network administrator has developed a Python script on the local Linux machine and is trying to transfer it to the router. However, the transfer fails. Which action resolves this issue?
- A. The SSH service must be enabled with the crypto key generate rsa command.
- B. The SCP service must be enabled with the ip scp server enable command.
- C. The Python interpreter must first be enabled with the guestshell enable command.
- D. The SSH access must be allowed on the VTY lines using the transport input ssh command.
Answer: B
NEW QUESTION # 65
Refer to the exhibit.
Which set of commands restore reachability to loopback0?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: A
NEW QUESTION # 66
During the maintenance window an administrator accidentally deleted the Telnet-related configuration that permits a Telnet connection from the inside network (Eth0/0) to the outside of the networking between Friday - Sunday night hours only. Which configuration resolves the issue?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: C
NEW QUESTION # 67
Refer to the exhibit.
An engineer configures SW101 to send OSPFv3 interfaces state change messages to the server. However, only some OSPFv3 errors are being recorded. which organization resolves the ..?
- A. snmp-server-enable traps ospfv3 state-change restart-status-change
- B. snmp-server-enable traps ospfv3 state-change if-state-change neighbor-state-change
- C. snmp-server-enable traps ospfv3 state-change neighbor-state-change.
- D. snmp-server enable traps ospfv3 state-change if-state-change
Answer: B
NEW QUESTION # 68
Drag and drop the addresses from the left onto the correct IPv6 filter purposes on the right.
Answer:
Explanation:
NEW QUESTION # 69
Refer to the exhibit.
An administrator that is connected to the console does not see debug messages when remote users log in.
Which action ensures that debug messages are displayed for remote loggings?
- A. Enter the logging console debugging configuration command.
- B. Enter the transport input ssh configuration command.
- C. Enter the aaa new-model configuration command.
- D. Enter the terminal monitor exec command.
Answer: A
NEW QUESTION # 70
Refer to the exhibit.
An engineer configured NetFlow on R1, but the NMS server cannot see the flow from R1. Which configuration resolves the issue?
- A. interface Ethernet0/1
flow-destination 10.221.10.11 - B. interface Ethernet0/0
flow-destination 10.221.10.11 - C. flow exporter FlowAnalyzer1
destination 10.221.10.11 - D. flow monitor Flowmonitor1
destination 10.221.10.11
Answer: C
Explanation:
Explanation
From the output we notice that the destination IP address is not correct. The NMS server IP address should be 10.221.10.11, not 10.221.10.10. Therefore we have to change this information under "flow exporter ..." configuration.
NetFlow configuration reference: https://www.cisco.com/c/en/us/td/docs/iosxml/ ios/fnetflow/configuration/15-mt/fnf-15-mt-book/cfg-de-fnflow-exprts.html
NEW QUESTION # 71
The network administrator configured CoPP so that all routing protocol traffic toward the router CPU is limited to 1 mbps. All traffic that exceeds this limit must be dropped. The router is running BGP and OSPF Management traffic for Telnet and SSH must be limited to 500kbps.
access-list 100 permit tcp any any eq 179
access-list 100 permit tcp any any range 22 23
access-list 100 permit ospf any any
!
class-map CM-ROUTING
match access-group 100
class-map CM-MGMT
match access-group 100
!
policy-map PM-COPP
class CM-ROUTING
police 1000000 conform-action transmit
class CM-MGMT
police 500000 conform-action transmit
!
control-plane
service-policy output PM-COPP
No traffic is filtering through CoPP,which is resulting in high CPU utilization,which configuration resolves the issue ?
- A. no access-list 100access-list 100 permit tcp any any eq 179
access-list 100 permit ospf any any
access-list 101 Permit tcp any any range 22 23
!
class-map CM-MGMT
no match access-group 100
match access-group 101 - B. No access-list 100
access-list 100 permit tcp any any eq 179
access-list 100 permit tcp any any range eq 22
access-list 100 permit tcp any any range eq 23
access-list 100 permit ospf any any - C. control-plane
no service-policy output PM-COPP
service-policy input PM-COPP - D. no access-list 100
access-list 100 permit tcp any any eq 179
access-list 100 permit ospf any any
access-list 101 Permit tcp any any range 22 23
!
class-map CM-MGMT
no match access-group 100
Answer: D
Explanation:
match access-group 101
!
control-plane
no service-policy output PM-COPP
service-policy input PM-COPP
NEW QUESTION # 72
Which component of MPLS VPNs is used to extend the IP address so that an engineer is able to identify to which VPN it belongs?
- A. VPNv4 address family
- B. RD
- C. LDP
- D. RT
Answer: B
Explanation:
NEW QUESTION # 73
Refer to the exhibit.
An engineer is trying to generate a summary route in OSPF for network 10.0.0.0/8, but the summary route does not show up in the routing table. Why is the summary route missing?
- A. The summary route is not visible on this router, but it is visible on other OSPF routers in the same area.
- B. There is no route for a subnet inside 10.0.0.0/8, so the summary route is not generated.
- C. The summary route is visible only in the OSPF database, not in the routing table.
- D. The summary-address command is used only for summarizing prefixes between areas.
Answer: B
NEW QUESTION # 74
Refer to the exhibit.
Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?
- A. Issue the eighr command on R2.
- B. Issue the no eighrp stub command on R2.
- C. Issue the no neighbor stub command on R2.
- D. Issue the eigrp stub command on R1
Answer: C
NEW QUESTION # 75
Refer to the exhibit.
An engineer must establish multipoint GRE tunnels between hub router R6 and branch routers R1, R2, and R3. Which configuration accomplishes this task on R1?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: C
NEW QUESTION # 76
......
To prepare for the Cisco 300-410 exam, candidates should have a good understanding of networking fundamentals and a solid foundation in routing and switching technologies. In addition, they should have hands-on experience working with Cisco routers and switches in enterprise networks. There are a variety of study materials available for 300-410 exam, including Cisco's official study guide, online training courses, and practice exams. With the right preparation, candidates can pass the Cisco 300-410 exam and advance their careers in enterprise networking.
Prepare For Realistic 300-410 Dumps PDF - 100% Passing Guarantee: https://examsboost.validbraindumps.com/300-410-exam-prep.html