ValidBraindumps 1Y0-241 dumps & CCA-AppDS Sure Practice with 114 Questions
New 1Y0-241 Exam Questions| Real 1Y0-241 Dumps
To achieve the Citrix 1Y0-241 certification, candidates need to demonstrate their proficiency in several key areas, including Citrix ADC deployment, configuration of load balancing and content switching, SSL offloading, and troubleshooting. They also need to be familiar with Citrix ADC features such as Global Server Load Balancing (GSLB), AppExpert policies, and AppFlow. Deploy and Manage Citrix ADC 13 with Traffic Management certification exam is intended for IT professionals who are responsible for managing Citrix ADC appliances in a production environment. By earning the Citrix 1Y0-241 certification, candidates can validate their expertise in Citrix ADC deployment and management and enhance their career prospects in the field of application delivery.
NEW QUESTION # 25
Scenario: A Citrix Administrator needs to configure persistence on a global server load balancing (GSLB) vServer to which a service is bound. Service must continue to handle requests from the client even after it is disabled manually - accepting new requests or connections only to honor persistence. After a configured period of time, no new requests or connections are directed to the service and all existing connections are closed.
To achieve these requirements, which parameter can the administrator configure while disabling the service?
- A. Persistence threshold
- B. Persistence time-Out
- C. Wait time
- D. Request threshold
Answer: C
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-advanced-settings/graceful-shutdown.html
NEW QUESTION # 26
Which mode does a Citrix Administrator need to configure to allow a Citrix ADC to control the packetforwarding function based on the route table lookups?
- A. Layer 2
- B. Layer 3
- C. MBF
- D. USIP
Answer: B
Explanation:
Layer 3 mode controls the Layer 3 forwarding function. You can use this mode to configure a Citrix ADC appliance to look at its routing table and forward packets that are not destined for it. https://docs.citrix.com/en-us/citrix-adc/current-release/getting-started-with-citrix-adc/configure-system-settings/configure-modes-packet-forwarding.html
NEW QUESTION # 27
Scenario: A Citrix Administrator is managing a Citrix ADC SDX running eight Citrix ADC instances. The administrator needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done simultaneously.
What upgrading flexibility does SDX provide in this scenario?
- A. The Citrix ADC instances must be upgraded simultaneously.
- B. The Citrix ADC instances can be upgraded at the SDX management level, allowing all instances to be upgraded simultaneously.
- C. The Citrix ADC instances can be upgraded from the lights out management (LOM) port and Citrix Cloud services to different firmware versions.
- D. The Citrix ADC instances can be upgraded on an individual basis, allowing all instances to run independent firmware versions.
Answer: B
NEW QUESTION # 28
Scenario: A Citrix Administrator would like to grant access to a Junior Citrix Administrator on the Citrix ADC.
The administrator would like to grant full access to everything except the following:
Shell User configuration
Partition configuration
Which preexisting command policy would meet the needs of this scenario?
- A. Operator
- B. Network
- C. Superuser
- D. Sysadmin
Answer: D
Explanation:
A sysadmin is lower than a superuser is terms of access allowed on the appliance. A sysadmin user can perform all Citrix ADC operations with the following exceptions: no access to the Citrix ADC shell, cannot perform user configurations, cannot perform partition configurations, and some other configurations as stated in the sysadmin command policy https://docs.citrix.com/en-us/citrix-adc/current-release/system/authentication-and-authorization-for-system-user/user-usergroups-command-policies.html
NEW QUESTION # 29
In an SSL offload deployment, which policy will allow a Citrix Administrator to modify all URLs in the response body from "http://" to "https://"?
- A. > add rewrite action Act1 replace_all "HTTP.RES.BODY(200000)" "\"http://\"" -pattern "https://"
> add rewrite policy Pol1 trueAct1 NOREWRITE - B. > add rewrite action Act1 replace_all "HTTP.RES.BODY(200000)" "\"https //\"" -pattern "http://"
> add rewrite policy Pol1 trueAct1 NOREWRITE - C. > add rewrite action Act1 replace_all "HTTP.RES.BODY(200000)" "\"https:\"" -pattern "http://"
> add rewrite policy Pol1 trueAct1 NOREWRITE - D. > add rewrite action Act1 replace_all "HTTP.RES.BODY(200000)" "\"http:\"" -pattern "\https://\"
> add rewrite policy Pol1 trueAct1 NOREWRITE
Answer: C
NEW QUESTION # 30
Scenario: A Citrix Administrator configured a global server load balancing (GSLB) setup for internal and external users using the same host name. For internal users, cvad.citrite.net should go to the Citrix StoreFront site; for external users, it should connect to the Citrix ADC Gateway VPN site.
Which feature should the administrator configure to accomplish this?
- A. DNS Proxy
- B. DNS Record
- C. DNS Preferred Location
- D. DNS View
Answer: D
NEW QUESTION # 31
Scenario: To receive data alerts for failures, a Citrix Administrator is configuring SNMP on the Citrix ADC. The administrator is confident that the manager, alarms and SNMP traps are configured correctly. The following week, there is a Citrix ADC-related outage and the administrator does NOT receive any alerts.
What could be the reason for this alert failure?
- A. The Citrix Web App Firewall is blocking the alerts from going out.
- B. The Citrix ADC is configured for SNMP version 1.
- C. The community name was NOT configured in the Citrix ADC SNMP trap destination settings.
- D. The Citrix ADC only has standard licensing.
Answer: C
NEW QUESTION # 32
To protect an environment against Hash DoS attacks, which two configurations can a Citrix Administrator use to block all post requests that are larger than 10,000 bytes? (Choose two.)
- A. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\")&&
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 70 END -type REQ_OVERRIDE - B. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 70 END -type REQ_OVERRIDE - C. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 70 END -type REQ_OVERRIDE - D. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\")&&
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 100 END -type REQ_OVERRIDE - E. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 100 END -type REQ_OVERRIDE - F. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 100 END -type REQ_OVERRIDE
Answer: A,E
Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX131868
NEW QUESTION # 33
Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL vServers?
- A. SSL policy
- B. SSL multiplexing
- C. SSL policy
- D. SSL bridge
- E. SSL profile
Answer: E
NEW QUESTION # 34
Scenario: While performing a disaster recovery test, a Citrix Administrator decides to failover the Citrix ADC high availability (HA) pair appliances. The administrator notices that the failover is NOT working as expected, and the secondary Citrix ADC is NOT taking over as primary. The administrator suspects that networking issues may be causing the failure.
What could be the cause of this issue?
- A. HA monitoring is enabled on an interface of the secondary node that shows as ENABLED, DOWN.
- B. HA monitoring is enabled on a disabled interface of the primary node.
- C. The Independent Network Configuration (INC) mode is enabled on the primary node.
- D. HA heartbeats are only seen on some enabled interfaces of the secondary node.
Answer: B
NEW QUESTION # 35
A Citrix Administrator needs to protect the HTTP backend server type without actually removing the header.
Which rewrite action type can the administrator apply to the Citrix ADC configuration to accomplish this?
- A. CORRUPT_HTTP_HEADER
- B. REPLACE_HTTP_REQ
- C. REPLACE_ALL
- D. REPLACE
Answer: D
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/appexpert/rewrite/rewrite-action-policy-examples/example-mask-http-server-type.html
NEW QUESTION # 36
Scenario: A load-balancing vServer is configured to utilize the least bandwidth load-balancing method. A service attached to this vServer is brought into the effective state during production hours.
During the startup of a vServer, which load-balancing method is used by default?
- A. Least connections
- B. Custom load
- C. Round-robin
- D. Least bandwidth
Answer: A
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-customizing-algorithms/leastconnection-method.html
NEW QUESTION # 37
Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?
- A. Add two more 10G Citrix ADC ports to the network and configure VLAN.
- B. Plug another 10G Citrix ADC port into the router.
- C. Purchase another Citrix ADC MPX appliance.
- D. Add another 10G Citrix ADC port to the switch, and configure Link Aggregation Control Protocol (LACP).
Answer: D
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/networking/interfaces/configuring-link-aggregation.html
NEW QUESTION # 38
A Citrix Administrator needs to configure a rate-limiting policy setting DNS requests to a threshold of 1,000 per second.
Which set of commands does the administrator need to run to correctly configure and enable this policy?
- A. > add stream selector DNSSelector1 client.udp.dns.domain
> add ns limitIdentifier DNSLimitIdentifier1 -threshold 1000 -timeSlice 1000 -selectorName DNSSelector1
> add dns policy DNSLimitPolicy1 " sys check_limit(\"DNSLimitIdentifier1\")" -preferredLocation "North America.US.TX.Dallas.. "
> bind dns global DNSLimitPolicy1 5 - B. > add stream selector DNSSelector1 client.udp.dns.domain
> add ns limitIdentifier DNSLimitIdentifier1 -threshold 5 -timeSlice 1000 -selectorName DNSSelector1
> add dns policy DNSLimitPolicy1 " sys.check_limit(\"DNSLimitIdentifier1\")" -preferredLocation "North America.US.TX.Dallas.. "
> bind dns global DNSLimitPolicy1 5 - C. > add stream selector DNSSelector1 client.udp.dns.domain
> add ns limitIdentifier DNSLimitIdentifier1 -threshold 5 -timeSlice 1000 -selectorName DNSSelector1
> add dns policy DNSLimitPolicy1 " sys.check_limit(\"DNSLimitIdentifier1\")" -preferredLocation "North America.US.TX.Dallas.. " - D. > add stream selector DNSSelector1 client.udp.dns.domain
> add ns limitIdentifier DNSLimitIdentifier1 -threshold 1000 -timeSlice 1000 -selectorName DNSSelector1
> add dns policy DNSLimitPolicy1 " sys check_limit(\"DNSLimitIdentifier1\")" -preferredLocation "North America.US.TX.Dallas.. "
Answer: A
NEW QUESTION # 39
To improve page-rendering time a Citrix Administrator needs to overcome the connection limitation by enabling client browsers to simultaneously download more resources.
What should the administrator enable while configuring the front end optimization (FEO) feature?
- A. HTML comments removal
- B. CSS import to link
- C. Domain sharding
- D. Image lazy loading
Answer: C
NEW QUESTION # 40
Which Citrix ADC platform offers an out-of-the-box multi-tenant solution?
- A. MPX
- B. SDX
- C. CPX
- D. VPX
Answer: B
NEW QUESTION # 41
Which four authentication types can a Citrix Administrator use for Citrix ADC authentication, authorization, and auditing (AAA) multifactor authentication? (Choose four.)
- A. NTLM
- B. TACACS+
- C. LDAP
- D. ADFS
- E. FIDO2
- F. OAuth
- G. RADIUS
Answer: C,E,F,G
NEW QUESTION # 42
Scenario: A Citrix ADC receives packets destined for a MAC address owned by the Citrix ADC. The destination IP address of the packets does NOT belong to the Citrix ADC. Layer 3 mode is enabled by default on the Citrix ADC.
The Citrix ADC will __________ the packets in this scenario. (Choose the correct option to complete the sentence.)
- A. bridge
- B. process
- C. drop
- D. route
Answer: D
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/getting-started-with-citrix-adc/configure-system-settings/configure-modes-packet-forwarding.html
NEW QUESTION # 43
Which setting is responsible for reducing the server load, improving response time, and increasing the number of SSL transactions per second on an SSL vServer?
- A. Session timeout
- B. SSLv3
- C. SSLv2 redirect
- D. Session reuse
Answer: D
NEW QUESTION # 44
Scenario: A Citrix Administrator manages an environment that has a Citrix ADC high availability (HA) pair running on two MPX appliances. The administrator notices that the state of the secondary Citrix ADC is 'Unknown'.
What is causing the secondary state to be 'Unknown'?
- A. The synchronization on the secondary appliance is disabled.
- B. The remote procedure call (RPC) nodes are incorrectly configured.
- C. TCP port 22 is disabled between the primary and secondary ADCs.
- D. The administrator made both Citrix ADCs primary.
Answer: B
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/system/high-availability-introduction/troubleshooting-high-availability.html
NEW QUESTION # 45
Scenario: The policies below are bound to a content switching vServer.
bind cs vServer vserver1 -policyName CSPOL_7 -priority 100 -gotoPriorityExpression NEXT bind cs vServer vserver1 -policyName CSPOL_5 -priority 90 bind cs vServer vserver1 -policyName CSPOL_9 -priority 110 bind cs vServer vserver1 -policyName CSPOL_4 -priority 120 bind cs vServer vserver1 -policyName CSPOL_8 -priority 210 Policy CSPOL_7 has been invoked.
Which policy will be invoked next?
- A. CSPOL_9
- B. CSPOL_5
- C. CSPOL_8
- D. CSPOL_4
Answer: A
Explanation:
https://training.citrix.com/public/Exam%20Prep%20Guides/231/1Y0-231_Exam_Preparation_Guide_v01.pdf
NEW QUESTION # 46
set gslb vServer-GSLB-1-MIR ENABLED
What will the Citrix ADC appliance send when the above command is executed?
- A. The Remote GSLB service as the first record in the response and adds the remaining active services as additional records
- B. Only the best GSLB service in the response
- C. The Local GSLB service as the first record in the response and adds the remaining active services as additional records
- D. The best global server load balancing (GSLB) service as the first record in the response, and the remaining active services as additional records
Answer: C
NEW QUESTION # 47
Scenario: The Citrix Administrator of a Linux environment needs to load balance the web servers. Due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator purchase and install to load balance the webservers?
- A. Citrix ADC CPX
- B. Citrix ADC VPX
- C. Citrix ADC MPX
- D. Citrix ADC SDX
Answer: A
Explanation:
Explanation/Reference: https://www.citrix.com.br/products/citrix-adc/cpx-express.html
NEW QUESTION # 48
Which Citrix ADC Access Control List (ACL) command can a Citrix Administrator use to bridge traffic originating from the IP address 192.168.10.200?
- A. add ns acl6
- B. add ns simpleacl
- C. add ns simpleacl6
- D. add ns acl
Answer: D
Explanation:
https://developer-docs.citrix.com/projects/citrix-adc-command-reference/en/latest/ns/ns-acl/
NEW QUESTION # 49
Scenario: A Citrix Administrator needs to integrate LDAP for Citrix ADC system administration using current active directory (AD) groups. The administrator created the group on the Citrix ADC, exactly matching the group name in LDAP.
What can the administrator bind to specify the permission level and complete the LDAP configuration?
- A. Users to the group on the Citrix ADC
- B. A command policy to the group
- C. An authentication, authorization, and auditing (AAA) action to the group
- D. A nested group to the new group
Answer: B
NEW QUESTION # 50
......
The benefits in Obtaining the Citrix 1Y0-241: Deploy and Manage Citrix ADC 13 with Traffic Management Exam Certification
- All of these other certifications can stack along with your CCA-N for a better job opportunity enhanced know-how and ability, and higher salaries.
- After passing Citrix NetScaler 12 Essentials and Traffic Management certification, there are many products to specialize in such as XenDesktop, Netscaler, XenServer, and XenApp.
- This 1Y0-241 exam also opens the door up to the other tracks of the Citrix Certification Program.
- Knowledge of Citrix products that are used across the world by companies, So being a CCA-N can not just let you benefit from the demand by finding employment once you are certified, but there are many other advantages such as getting the respect in the industry as an individual of expertise in your field of specialization, creating chances of getting high-paid opportunities and board job variety, also it can put candidates on their first step to becoming big in the IT industry.
1Y0-241 Braindumps – 1Y0-241 Questions to Get Better Grades: https://examsboost.validbraindumps.com/1Y0-241-exam-prep.html